You are here:HOME >> Products >> ROLL FORMING LIN... >> Drywall Partition Systems R...

Products

Products

News

Drywall Partition Systems Roll Forming Line

Auto width Adjustable - High Speed Studs & Tracks Making Machine

KINGREAL high speed studs and tracks making machine can produce various sizes of studs, tracks on one machine. Based on different customer‘s request, there are different ways to adjust the width, automatically or manually. 

  • KINGREAL high speed studs and tracks making machine can produce various sizes of studs, tracks on one machine.  Based on different customer‘s request, there are different ways to adjust the width, automatically or manually. 
    High speed studs and tracks making machine with auto width change

    The studs and tracks roll forming machine is used for production of different sizes of studs and runners, the output speed is up to 100m/min. The studs and tracks roll forming machine is featured with follow punch and fly shearing system. 
    auto width adjustable studs and tracks roll forming machine

    By changing different molds size and punch molds, it can produce different sizes of products for the market. 

    high speed studs and tracks roll forming machine
    Light Steel Keel Roll forming machine
    1. Roll Forming Equipment composition:
    The studs and tracks equipment consists of a discharge machine, a guiding frame, a forming host, a calibration device, a cut-off part, a receiving table, and an electrical control part.
    2. Equipment performance:
    Unit rolling capacity: width ≤ 200mm
    Sheet thickness 0.6-1.2mm
    Production speed: 30-100 m / min
    Total installed capacity: about 5.5kw
    Production area: length 15 meters x width 2.5 meters
    The specific design plan is customized according to the customer‘s product drawings and customer requirements.
    high speed gypsum board profile roll forming machine

    ●Light steel keel roll forming machine Product Description:
    The light steel keel roll forming machine uses strip steel as raw material to produce complex section profiles through continuous cold rolling forming, with various models and various functions. We can design and manufacture different specifications of cold bending and roll forming equipment according to customer requirements.
     Drywall studs and tracks roll forming machine
    ●Product characteristics
    The light steel keel produced by the light steel keel roll forming machine is a new type of building material with the following characteristics:
    1. Fire prevention: Light steel keel is made of fireproof galvanized sheet and is durable.
    2, the structure is reasonable, using economical placement structure, special connection method, combined loading and unloading, convenient, saving man-hours.
    3, beautiful appearance: the surface of the keel is galvanized steel, after baking treatment.
    4, light weight, high strength, short construction period, simple construction, which is widely used by users and design units.
     
    ●Product application
    The light steel keel roll forming machine is used for the decoration of non-load-bearing walls and roofs of buildings with light-weight plates such as gypsum board and decorative plasterboard. It is the decoration of various roofs of buildings and the inside and outside of buildings. The base material for wall and scaffolding ceilings. It is used in hotels, terminal buildings, passenger stations, stations, theaters, shopping malls, factories, office buildings, old building renovations, interior decoration settings, ceilings and other places.
    Drywall partition system keel roll forming machine

    KINGREAL Drywall studs and tracks high speed roll forming machine machine is made of strip steel as raw material and is produced by continuous cold rolling to produce complex section profiles (products include: light steel keel, studs roll forming machine, tracks roll forming machine, runners roll forming machine,  painted keel, card keel, various architectural profiles, steel structures, steel lining frame profiles, High-speed barriers, etc.) and different specifications of cold-roll forming machine and painting units are controlled by PLC.

    Features of the roll forming machine:
    1. Unit rolling capacity: width ≤ 150mm, sheet thickness 0.6-2.0mm
    2. Production speed: 30-100 m / min
    3. Total installed capacity: about 15kw
    4. Production area: length 15 meters X width 2.5 meters
    1. The equipment control is PLC control, and multiple safety protection is set during normal production.
    2. The bed is welded with steel plates. It is also tempered to eliminate internal stress and avoid deformation of the fuselage.
    3. The forming frame is cast iron structure and tempered. High strength and long service life.
    4. The material of the roll shaft is 40Cr, and the hardness is HB280 after quenching and tempering treatment.
    5. The material of the forming mold is Cr12MoV, quenching treatment, hardness: HRC 56-62 °C.
    6. The transmission structure is gearbox transmission. Each forming frame has a light steel keel machine. It can guarantee the equipment over time, high intensity operation and long service life.
    high speed partition wall studs and tracks roll forming machine
    Processing technology of metal studs and tracks roll forming machine machine: discharging----directing----roll forming----cutting----receiving
    Light steel keel machine equipment consists of: discharge machine, guiding frame, forming host, calibration device, cut-off part, receiving table, electrical control part and so on.
  • Or use the form below to contact us:

    *

    *

    *

    *

High Speed U channel Roll Forming Line

High speed Angle Channel Roll Forming Line

Metal Baffle Ceiling Roll Forming Machine

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales