You are here:HOME >> News >> Industry news

News

News

News

Briefly describe what are the problems before using the cold bending machine


When using the cold bending machine, you should make sure to prepare in advance for common problems. Here is a brief introduction, what are the key points of attention throughout?
Before using, be sure to choose a flat cabinet table to unfold and place it to ensure that the equipment is prevented from being stable, and then open the main cabinet feet to facilitate unfolding and inspection. Then insert the power plug into the control panel, and unfold the rotation to grasp it. Secondly, one end of the power plug is plugged into the control panel behind the main box, and the other end is plugged into the switching power supply, and it is stipulated that a single-phase three-wire switching power supply is generally used. Then turn on the power switch behind the main box, and then follow A certain method expands the actual operation execution, and adjusts to a certain value. Later, until the emerald green indicator light turns on and the reminder sound appears, the next step is to start the sealing work, and then check the quality of the sealing, and carry out the actual operation according to different materials to ensure the sealing. The quality assurance is better.
Compulsory protection and maintenance of cold-bending machines are very important: the protection and maintenance of all industrial equipment is an important step in the service period of the addition period. From the perspective of the total service cycle time of the cold-bending machines, use, protection, maintenance, and overhaul account for the total number of cold-bending machines. The vast majority of the service life also shows a guarantee for the cold bending machine to give full play to its practical value.
The cold-bending machine project has a large construction volume list, tedious daily tasks, high project investment, over-time and strong periodicity, mandatory protection and maintenance of the cold-bending machine is necessary, and mandatory protection and maintenance are for long-term field operations. It is essential for equipment in difficult environments. According to the analysis of common failures that have grown up, 56% of cold bending machines are based on the fear of protection and maintenance. 38% are due to errors in maintenance on time, and 6% are caused by incorrect operations. Therefore, mandatory protection and maintenance are caused by cold bending. The machine is necessary.
Why do cold-drawn forming equipment do well in the lubrication work: lubrication can be intermittent or continuous lubrication according to the time. In terms of daily maintenance, if the equipment does not operate, we only need to change the oil once in half a year You can, but if the equipment is working, the second and third lubrication time period should be between 20 and 30 days, which is not bad and it doesn’t take a long time.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales