You are here:HOME >> News >> Industry news

News

News

News

Cold roll forming machine maintenance and operation


The cold roll forming machine has made the development of the cold roll forming industry and played a big role in the machinery industry. For this large machine, it is very important to be suitable for maintenance. Let‘s take a look at the maintenance of the cold roll forming machine.
Cold roll forming machine maintenance is also called lubrication maintenance. We introduce from two aspects of continuous lubrication and intermittent lubrication. If the cold roll forming machine is in the state of being shipped for a long time, the cold roll forming machine should be lubricated for half a year. If it is used for a long time, it will be lubricated once every 10-30 days to make it more efficient and prolong its service life. Here to remind you, in the course of use, if you find any use failure, please stop running immediately, check the repair, do not cause harm to the staff.
The maintenance of the cold roll forming machine is very important. The user must not only operate correctly according to the operation process, but also have professional maintenance knowledge.
Cold roll forming machine operation:
1. Before starting the machine, first check whether there are any sundries on the machine, or whether there are any objects in the vicinity that need to be cleaned that will affect the normal production of the machine;
2. Lubricate the parts of the cold roll forming machine that need lubrication, such as gears, bearings, cutters, etc. If there is a punching device, add lubricant to the guide post of the punching device and the various parts of the punching die;
3, cold roll forming machine before the production test. Home Turn on the main power switch, manually operate each function is normal;
4. Start feeding production. After the normal test of each function of the test run, start the feeding production, and pay attention to the emergency situation that may occur in the whole production line at any time during the production process. At the time of production, the machine cannot stand;
5. Receiving materials at the discharge port and adjusting the production speed of the cold roll forming machine according to the working speed;
6. After the production of the cold roll forming machine is finished, the main power switch should be turned off to completely cut off the power of the machine;
7. Clean and clean the cold roll forming machine to keep the body clean. And the waste generated at the time of production should be cleaned up;
8. Close the electrical box to prevent the other unrelated personnel from operating the machine and causing damage to the machine.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales