You are here:HOME >> News >> Industry news

News

News

News

Disassembly method of cold roll forming machine

Disassembly method of cold roll forming machine

During the operation process of cold roll forming machine, you inevitably may encounter some problems, and need to disassemble the cold roll forming machine for repair. There are some basic principles to follow:



1. You must have profound understanding of the model and related information about the machine before you take actions. You have to get to know its structures and assembly relation, and then determine the disassembly method and steps;

2. Choose the right tools and equipment, and you must try to find out the reason if you encounter some problem during the disassemble process. Appropriate methods should be taken instead of fierce upset knock, preventing to cause further damage to the machine, moreover you cannot use measuring tool and pliers to replace the hammer;

3. The direction and the mark shall be cleared when removing the specified direction and marks, and shall be marked again if the mark is lost.

4. To avoid the damaged or lost of removed parts, the removed parts should be stored separately according to the different size and precision, and in accordance with the disassembly sequence, precision and important components should be stored with care;

5. The bolts, nuts, and etc. shall be put in place without affecting the repair of the cold roll forming machine, so as not to be lost.

6. Assemble the machine according to the situation, and you does not have to repore the machine if it can function well which can save time and labor.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales