You are here:HOME >> News >> Industry news

News

News

News

How to maintain cold rolling mill equipment in rainy and snowy days?


So when it comes to rain and snow, you should pay more attention to it. For cold rolling mill equipment, if you want to ensure that it is in an outstanding working condition, how should it be done?
   If the equipment can maintain a good operating condition and can meet the needs of production at any time, then this will also reduce a certain cost. Moreover, good related protection and maintenance can also make the cold rolling mill equipment work longer, reduce the incidence of faults, and thus reduce the loss of downtime caused by faults, and fully ensure the efficiency of the equipment. , It is very important to strengthen maintenance in rainy and snowy days.
Because of the bad weather in rainy and snowy days, the maintenance work of cold rolling mill equipment should be strictly implemented in accordance with certain standards, and the principle of "equal attention to maintenance and prevention" as the criterion, to achieve regular maintenance, mandatory implementation, and correct handling Use, maintain and repair the connection to avoid undesirable situations such as only using but not raising or only repairing but not raising.
Then, a set of practical maintenance plans should be drawn up according to the corresponding maintenance work, and the work content should be assigned to detailed personnel. Each team must do various maintenance tasks according to the maintenance procedures and maintenance categories of the cold rolling mill equipment. No unreasonable delay. If there are special circumstances, the maintenance should be properly postponed after the approval of the special engineer in charge, but the requirement shall not exceed half of the regular maintenance interval. All maintenance items, maintenance quality, and problems found during maintenance should be recorded and reported to be handled in a timely manner.
   In addition, it is necessary to continuously improve the standards and quality of maintenance work on cold rolling mill equipment. Relevant staff and departments should also be required to perform three inspections and one submission, which specifically refers to self-inspection, mutual inspection, full-time inspection, and one-time cross-connection. In this process, the maintenance experience should be continuously summarized and the maintenance quality should be improved.
  Finally, the inspection work on the maintenance of different cold rolling mill equipment will be implemented to ensure and inspect the quality of the maintenance work.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales