You are here:HOME >> News >> Industry news

News

News

News

Talking about the details of the use and debugging of cold-formed forming equipment


Cold forming equipment is used in the processing of galvanized sheets, strip steel, and stainless steel sheets. The demand for cold-formed forming machinery is mainly concentrated in industrial products such as medium and large, heavy-duty. The cold bending production line also has the advantages of convenient operation, good maintenance, good maintenance, mechanical debugging, and easy mold exchange.

Before using the cold bending forming production line, please pay attention to debugging. The method is as follows:

1. The debugging method for the deviation of the pressure plate of the cold bending equipment, such as the plate running to the right, cushioning the left corner, or falling to the right and bottom.

2. Find the middle of the cold-formed forming equipment row and the back row, then tighten the lock nuts on both sides, pull a straight line before and after the middle of the middle wheel, and adjust the gap between the upper and lower shafts. Adjust the machine in a straight line.

3. First, the four corners of the front and back lines of the cold bending equipment are divided from the height of the upper end of the bottom shaft of the large frame, and then from the row to the back row, find a line to straighten, and check whether the bottom shaft is in a straight line Up, adjust the left and right sides of the lower axis to the degree.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales