You are here:HOME >> News >> Industry news

News

News

News

Technical characteristics and principles of cold bending machine


There is a characteristic of cold bending industry technology. The main reason is that the cold bending machine industry does not have a special training institution, and there is no comprehensive series of tutorials to guide it. Because it is a non-standard machine, it is difficult to have a unified specification and learning plan. Most of the technical talents in the cold bending machine industry rely on groping, slowly summing up, learning with their predecessors, starting from being an apprentice, and relying on continuous summary and accumulation through slow practice. At the same time, talents in design technology generally need to understand debugging. Design and debugging are complementary. If you encounter problems during debugging, you must know how to redesign and modify. There is no professional training for design technology talents. Similarly, debugging talents also need to learn from teachers. They must persevere in order to learn the debugging technology of this industry.
The cold bending machine is mainly composed of a base, a motor drive, a roll module, hydraulic pressure, electrical control, and some auxiliary processing systems. When working, the drive system is started, and the sheet is gradually formed through a series of cold-formed rolls. After the forming is completed, the hydraulic cutting system or the flying cutting system is started according to the length set by the customer. If you need punched section steel, you can add a punching module to the front end of the forming host according to the requirements of the profile, or punch after forming. The action of the whole set of cold bending machine is controlled by the control system, and the actions are carried out in an orderly manner according to the setting of the program.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales