You are here:HOME >> News >> Industry news

News

News

News

The role of cold-formed steel machinery in the processing of trough equipment


The cold-bent forming line for trough equipment is a kind of cold-formed steel machinery. It is specially used for the production of trough equipment. The metal sheet is first uncoiled, leveled and then turned to complete the punching, and then enters the cold-formed main machine Then, it is rolled into the trough equipment profile needed for breeding after multiple passes through the rolling die.
The automatic production equipment is cut according to the required length, and the requirements for the operators are relatively simple, and only one person can complete it. The equipment is not only highly automated, but also convenient for management and maintenance. The main thing is to improve production efficiency and reduce the production and operation costs of the enterprise.
This kind of cold-formed steel machinery adopts the arch structure, high strength, gear box transmission, stable operation; the design of the roll mold is scientific and reasonable, the internal structure of the raw material is less damaged, the process is reliable, the punching accuracy is high, and the length can be cut as needed. The pressing speed is about 10 meters per minute, and the output is very high.
With the development of modern industry, the demand for food trough cold-bending forming line is also increasing. The processing equipment of trough cold-bending forming line solves the problems of many traditional processes and high costs, and realizes the mass production of production line mode. Only one person is required to complete the processing of raw materials to finished products.
The main part of the cold-formed steel machinery is the roller. In order to extend its life, the principle of average force on each pass is required. The roller is equally stressed and wears evenly. The material is used to make use of its wear resistance, but the specific strength and hardness are contradictory. , The red hardness of C12MoV should be used during heat treatment. After quenching, the hardness can be reached after two to three times of tempering.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales