You are here:HOME >> News >> Industry news

News

News

News

What are the product characteristics of cold-formed forming equipment?


Product features of cold forming equipment:
1. C12MoV is used for the rolls of the cold-formed forming equipment to make full use of its wear resistance. The red hardness of C12MoV is selected for heat treatment. After quenching, it is tempered twice or even three times to reach the hardness.
2. The cold bending machine adopts fully automatic numerical control control, and the original parts are imported or domestic well-known brands, which truly realizes the automation, precision and convenience of the production of cold bending equipment.
3. The arc part of the track is the core part of the slide rail. The arc position after the first few passes is pressed and formed. When the vertical edge is rolled and folded in the later pass, the formed arc shall be effectively processed through the upper and lower rolls or horizontal wheels. Tube bundle protection, otherwise, the slide rail will shake, the track will be blurred, the force will be uneven, the slide rail will be deformed, and the life will be shortened.
4. The products are selling well all over the country, such as shelf column forming, car frame forming, car box panel forming, etc. What are the protection and safety measures used in the cold bending machine?

The safety measures for the cold bending machine are as follows:
1. When protecting the cold-bending machine, the power supply on the cold-bending machine must be cut off from the external power supply, and it cannot be operated with power.
2. Unless you know enough about the equipment, don‘t disassemble any parts of the cold bending machine at will.
3. Do not touch the wire connectors or other components that are connected with wires and are not loosened, which may be exposed to the outside world. Before disassembling or moving the protective device on the light steel keel machine or replacing the components, the power supply must be cut off.
4. Try to stand on the plastic blanket for maintenance and repair operations. Never protect the cold bending machine on a flooded floor or in a very humid environment. When protecting the cold bending machine, you must wear safety gloves, goggles and long-sleeved work clothes to prevent body parts from being burned by high temperature or being burned by the surface of high temperature components.

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales