The working process of the KINGREAL high speed steel coil slitting line - Double blades base: This coil slitting machine is a special shearing device that processes the carbon-cold cold rolled coil and galvanized sheet by high-speed precision slitting into a required width.
The main working machine of the high speed coil slitting line consists of four main mechanisms: Decoiler machine, precision disc type knife seat, plate tension generating station and Recoiler machine. The middle is supplemented by conveying material, pinch leveling machine, head shearing machine and buffer. , laminating, guiding, winding waste, splitting shears, discharging and other devices.
First, the main slitting line parameters suitable for this unit:
1. Material of raw materials: stainless steel, cold-rolled steel.
2. Raw material thickness: 0.2mm-2.0mm
3. Raw material width: 300-1550mm
4. Raw material roll inner diameter: Φ508mm
5. Raw material roll outer diameter: ≤Φ1800mm
6. Raw material volume weight: ≤12 tons
7. Slitting speed: 0-80m/min (normal working)
8. Total power: about 150KW
9. Floor area: about 18m × 6m
Second, high speed slitting line equipment standard acceptance requirements:
1. Strip width: 40 mm minimum
2. Finished product tolerance: subject to new knife cut:
Thickness 0.2-2.0 mm=±0.03mm
3. One-sided straightness (sickle bending): ≤0.3mm/M
4. Buttercup: ≤0.05mm
5. Production speed and cutting capacity: (subject to actual operation)
2.0-mm can be divided into ≤ 6 (speed: 50M / Min)
10 strips at 1.5 mm (speed: 60M/Min)
15 points can be divided into 1.0 mm (speed: 80M/Min)
20 pieces can be divided into 0.2mm (speed: 100M/Min)
6. Finished product winding inner diameter: ≥ 508 mm
7. Coiling finished product requirements: no material is received, and the receipt is neat
8. Each unit: no problem when single or continuous operation
Third, the high precision coil slitting line equipment composition:
1. Hydraulic pallet truck, one for each feeding and discharging
2. Hydraulic uncoiler 1 set
3. Five-bar leveling machine and head hydraulic shearing machine 1 group
4. Looper (Bridge Bridge) 1 group before and after
5. Guide device (ie manual side guide) 1 group
6. Slitting host 1 group
7. Independent waste coiler (with automatic cable) 1 left and right
8. Hydraulic tensioning machine with narrowing device, 1 set
9. Separator, hydraulic coiler 1
10. Hydraulic system 1 set
Slitting line slitter
- Material: hot rolled sheet, galvanized sheet, cold rolled sheet, stainless steel, aluminum sheet, galvanized sheet, etc.
- Material weight: up to 10T
- Material thickness: 0.15-0.8mm
- Material width: ≤1550 mm
- Discharge width: 20 mm-1550 mm, stepless
- Tool shaft diameter: φ180 mm
- Slitting speed: 0-180 m/min, stepless
- Unilateral non-straightness: ≤0.1mm/m
- Slitting width error: ±0.02 mm
Equipment composition and function:
1. Inlet and discharge trolley 2 sets
2. Hydraulic uncoiler (including auxiliary support) 1 set
3. Delivery (optional: none) 1 set
4. Shovel head, pinch roll, and hydraulic shearer 1 set
5. Live bypass bridge, (buffer pit) 1 group
6. Manual side guide, pinch 1 set
7. Slitting host 1
8. Feeding rack, scrap reel (two sides receiving) 1 group
9. Crossing bridge, (buffer pit) 1 set
10. Separator, and force generating station
11. Separator, rewinding machine (including auxiliary support), pushing device 1 set
12. Hydraulic system 1 set
13. Electronic control system
+86-137 0285 5825 
jet-clima