You are here:HOME >> News >> Faq




Classification and purchase process of racking system

According to whether the shelf is fixed or mobile, it can be divided into:

1. Fixed shelves:

 Fixed shelves can be subdivided into shelf type, tray type, through type, gravity type, press-in type, attic type, steel structure platform, cantilever type, mobile type, drawer type and corbel type shelves, etc. .

2. Mobile racks :

Mobile racks can be subdivided into mobile racks and rotating racks, of which mobile racks can be subdivided into light and medium-sized mobile racks(also known as dense racks, divided into manual and electric), heavy-duty racks Pallet type mobile racks, rotary racks can be subdivided into horizontal rotary racks and heavy and straight rotary racks.

According to whether the overall structure of the shelf is welded or assembled, it can be divided into:

1. Welded shelves.

2. Assembled shelves. At present, most of the domestic use of assembled shelves.


According to the connection between the racking system and the warehouse building structure, it can be divided into:

1. Warehouse and rack-in-one rack. The racking system and the roof of the building constitute an inseparable whole. The roof load is directly supported by the racking columns, and the building envelope(wall) structure is installed on the columns on both sides.

2. Separate structure shelves. The racking system and the building are two separate systems that are not directly connected to each other.


According to the load capacity of each layer of the shelf, it can be roughly divided into:

1. Light-duty shelves: the load capacity of each layer is not more than 200kg.

2. Medium-sized shelves: the load capacity of each layer is 200~500kg.

3. (3) Heavy-duty shelves: the load capacity of each layer is more than 500kg.


 According to the height of the shelf, it is divided into

1.  Low shelf: the height is less than 5m.

2. High shelf: height 5~12m.

3.  Super high shelf: 12m or more.


The purchase process of the racking system

- Customers put forward requirements for warehouse racking system

- Supplier design and selection

-Program discussion and optimization

- Assessment of the rationality and optimization degrees of the scheme


-Supplier selection

-Contract signing

-Detailed technical design of racking system

-Shelf system manufacturing (material preparation, processing, surface treatment, packaging, etc.)

-Shelving system installation


  • Previous:Nothing
  • Next:What are Shelving racks?  2022/05/11
  • Related Products

    Online Now #
  • +86-137 0285 5825 
  • [email protected]
  • jet-clima jet-clima
  • 952688242Sales