You are here:HOME >> News >> Industry news

News

News

News

Industry news

How to improve the status of cold roll forming equipment

The cold-bending forming equipment is a machine that continuously bends metal plates and strips such as coils and strips through multiple-pass forming rolls equipped in sequence to form a plastic processing technology for specific cross-section profiles....

LEARN MORE>>

The difference between cold bending machine and hot bending machine

The cold-bending machine is based on the multi-pass forming hot-rolled steel strip equipped with the second time, and the waterproof coils, amorphous strips and other metal strips are continuously bent horizontally to make the production process of special cross-section aluminum profiles. Cold drawing is a sheet meta...

LEARN MORE>>

How to improve the status of cold roll forming equipment

The cold-bending forming equipment is a machine that continuously bends metal plates and strips such as coils and strips through multiple-pass forming rolls equipped in sequence to form a plastic processing technology for specific cross-section profiles....

LEARN MORE>>

Process design development of forming machine for cold bending equipment

With the development of more mature and more stable process design of the cold bending equipment forming machine, it provides excellent performance for the sheet metal during the forming process. The cold-formed forming process of complex and special-shaped metal sheets, etc., and a variety of materials can be comple...

LEARN MORE>>

Cold-formed forming machine is a necessary mechanical equipment for cold-formed steel...

Cold roll forming machine is widely used in industrial production. It is widely welcomed by people because of its high work efficiency, low noise and no pollution to the environment. However, the use of cold roll forming machine has certain regulations, and only correct use. Only then can we ensure the improvement ...

LEARN MORE>>

What are the process methods for cold-formed steel?

Cold-formed steel refers to finished profiles with various cross-sectional shapes bent from steel plates or strips at room temperature. Thin-walled cold-formed steel is the main material for making light steel structures. Cold-formed steel has a variety of ultra-thin, reasonable and complex cross-sections that canno...

LEARN MORE>>

What are the advantages of cold bending equipment?

1 Equipment control is PLC control, and multiple safety protections are set up during normal production. 2 The bed is welded with steel plate. And tempering to eliminate internal stress to avoid deformation of the fuselage....

LEARN MORE>>

Knowledge required for cold bending equipment operation

Before operation, first check whether each lubrication point is short of oil, whether the movement mechanism is loose, and whether the safety protection device is reliable, and can only be operated after confirmation. Start the oil pump and check whether the system pressure is kept within the specified range. If it ...

LEARN MORE>>

Debugging of cold roll forming machine

The debugging of the cold roll forming machine requires a good work experience. In order to make it easier for everyone to master the debugging method of the cold roll forming machine, we have specially compiled the following manual for your reference and introduce some There are some methods for debugging cold roll...

LEARN MORE>>

What are the operating procedures of the cold-bending machine?

The operating procedures of the cold bending machine, its main contents are: (1) The press speed should be adjusted according to the properties of the processed material and the processing curvature to make it suitable. (2) During the processing, the workpiece should be prevented from breaking and flying out to prev...

LEARN MORE>>

What are the characteristics of the cold roll forming machine?

Cold-formed forming machine, literally, is a kind of machine equipment that uses cold-formed technology to cold-form metal sheets such as coils, strips, etc., so that the metal sheets can become profiles with specific cross-sections. Therefore, from its definition, the use of this machine is very extensive, but do we...

LEARN MORE>>

Application of high-strength weather-resistant cold-formed steel

In recent years, with the development of the application technology of cold-formed equipment in my country, economic profiles such as cold-formed thin-walled steel have developed rapidly. Compared with traditional rolled profiles, cold-formed thin-walled steel has reasonable cross-section material distribution, large...

LEARN MORE>>

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales