You are here:HOME >> News >> Industry news

News

News

News

Industry news

Analysis on the future development prospect of cold roll forming industry

The tremendous development of the domestic cold roll forming industry is not only reflected in the continuous expansion of production scale, the continuous increase in the number of production, the deep expansion of the application field, but also in the following aspects. Our cold roll forming equipment factory has ...

LEARN MORE>>

Cold roll form steel industry is not ideal

First, market development is lagging behind the improvement of production equipment capacity, and overcapacity must be taken seriously. At present, the virgin land in the cold-formed steel market is still a large proportion, and the surface of the national economy adopting cold-formed steel is not large enough, and t...

LEARN MORE>>

Some properties and uses of cold roll forming machines

Some of the properties and uses of the cold roll forming machine are simply a brief introduction. 1. The problem of bending and twisting in production is mainly caused by the imbalance of force. The left and right forces are unbalanced, bending left and right, and the upper and lower forces are unbalanced, resulting...

LEARN MORE>>

What is the principle of cold roll forming rebound

The cold roll forming process of the profile is the process of elastoplastic deformation of the profile. After unloading, the profile will produce a certain amount of rebound. The amount of springback will directly affect the molding quality. The method of predicting the amount of springback generally has theoretic...

LEARN MORE>>

Cold Roll Forming Machine Roll Design and Manufacturing Features

The design of the cold roll forming machine rolls should pay attention to the following points to avoid unnecessary troubles in production: 1. Roller adopts C12MoV material, its specific strength and hardness are contradictory, mainly by its wear resistance. When heat treatment, it should use the red hardness of ...

LEARN MORE>>

How the cold roll forming machine works

The cold roll forming machine is composed of six parts: base, mechanical transmission, cold roll forming system, hydraulic system, electrical control system and auxiliary system. The working principle of the cold roll forming machine is: Pushing the required cold-formed profile steel between the two active rollers b...

LEARN MORE>>

Introduction to the maintenance of summer cold roll forming equipment

The hot summer is coming, the temperature rises, the weather is unstable, and the air humidity in the summer that often rains increases a lot. . Sometimes, as long as any one factor can have an indelible impact on the machine! How should the cold roll forming equipment be maintained on this hot summer day to make th...

LEARN MORE>>

Brief introduction to the debugging method of cold roll forming machine pressure plate deviation...

Any machine has a bad time, whether it is used improperly or longevity, but how to fix it when it goes wrong is the responsibility of every manufacturer! Let me talk about the debugging method when the cold roll forming machine press plate is deflected: when the cold roll forming machine is deflected, if the plate ru...

LEARN MORE>>

Briefly describe how to make the production of cold roll forming machine more effective...

I think everyone has their own opinions on the production process of the cold roll forming machine, but how to make the production of the cold roll forming machine more effective, I hope that I will help you later. According to the principle of average force, the average roller of the county is subjected to average...

LEARN MORE>>

Cold roll forming machine maintenance and repair

After the cold roll forming machine is used for a period of time, there may be a series of problems, such as failure to operate normally, various problems occur during the operation, and the operation has to be terminated midway, affecting business processes and performance. So why are these problems occurring and ho...

LEARN MORE>>

Cold roll forming machine market prospect analysis

Due to the high price advantage, many companies are focusing on export business, and the benefits are also good, but there is no large-scale sales network. Enterprises should focus on product quality, rather than chasing low cost, or they will be eliminated by the market. The market products of the cold roll forming...

LEARN MORE>>

Current status of cold roll forming machine

Conservative cold roll forming machine to the over-growth of CNC cold roll forming machine, the cold roll forming machine is a metal forming hydraulic machine for processing steel parts such as ribs, beams and tibia on the hull, which is processed by three-point bending or pure bending. Profiles to achieve the req...

LEARN MORE>>

Related Products

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales