Partition Frame refers to the lightweight partition wall formed by installing panels on both sides of the partition keel - the skeleton consists of the upper sill, lower sill, vertical bars, horizontal bars (also known as transverse), diagonal bracing, etc. The spacing of the vertical bars depends on the specifications of the materials used. The spacing of the vertical bar depends on the specifications of the material used, and then use the same cross-section of the material in the vertical bar along the height of the direction, according to the specifications of the panel and set the horizontal bar, the two ends of the brace, nailed, in order to increase stability.

The metal skeleton is generally made of thin-walled lightweight steel, aluminum alloy or steel plate, which is cold-bent and manufactured by Stud And Track Roll Forming Machine. This partition wall has been widely used in recent years because of its wide range of material sources, high strength, light weight, fire prevention, easy processing and mass production.

1. Before installing the studs and tracks partition wall, you first need to determine the wall position, lay out the line on the ground, and extend the line to the ceiling. Next, clean the ground and wall, apply a layer of treatment agent, and prepare other materials.

2. Then prepare the metal stud and track and fix it with nails. Determine the vertical and horizontal keel spacing and draw lines along the metal stud and track.

3. Next, fix the metal track first, then install the metal stud. Use wood strips to fix it. After fixing it, use gypsum board to install it. It is best to use self-tapping screws to fix it.

4. Then you need to fix the door and window frames. You can use wood screws to fix them, and finally install the gypsum board. Seal the joints with foam glue, and then decorate the wall to complete the entire metal studs and tracks installation process.